(888) 423-3191

LED Shop Lighting

Fixtures for Workshops and Open Areas

Shop for LED shop lights for workshops, garages and warehouses. Designed for residential and commercial lighting applications. Lots of options and styles with many in stock ready to ship.

Shop lights brighten task areas, large garages, workshops, utility rooms and shops. They can mount on ceiling or suspend them with wires or chains. Integrated LED Shop Lights commonly replace fluorescent fixtures. Free Shipping Available!

Why choose MyLEDLightingGuide Shop Lights?

4 ft LED Shop Lights

 
 
 
 

4 ft LED shop-lights used as shop lights for commercial retail stores, warehouses and storage rooms. They suspend mounted with a hook and chain for lower mounting. They are the perfect replacement for fluorescent fixtures. 100-277V options available as well as linkable led shop lights.

8 ft LED Shop Lights

 
 
 

8 ft LED strip lights applications include times when there is a need for longer fixtures. 8 ft LED shop strip lights produce high lumen output and are the perfect replacement for 8' fluorescent fixtures. They have high efficacy and offer more energy savings over traditional style fluorescent lights.

LED Low Bay Shop Lights

 

 

 

Use LED low bays and lower power LED integrated fixture high bays for warehouse and lower ceiling applications. LED bay shop fixtures can be the round ufo style or linear panel shaped. They suspend mount using a pendant mount or with a hook and chain. Using low bays and high bays produces a quality lighting for your area. 

Hardwired Shop Lights and Plug-in Options

 

 

 

Hardwired Shop-Fixtures connect to your lighting with j-box connections. Plug-in models plug directly into the existing electrical box. We have models that will work in either situation. Options available in 100-277V or 277-480V.

1. Efficacy (Lumens Per Watt)

130 lm/w
150 lm/w
180 lm/w

We have LED fixtures that are rated between 130 and 180 lumens / watt. The higher the efficacy, the less watts you will consume producing the necessary light levels. While the initial cost may be slightly higher for the higher efficacy product, the payback will more than offset this additional cost.

MyLEDLightingGuide Pro Tip

Higher Efficiency will save you the most money!

Over the life of a product, the higher efficiency product will be the best choice. The higher cost will pay itself off and back many times over during its life span.

2. Wet Location Fixtures

IP65
IP66

IP rating designates a fixtures ability to keep out both dust and water. The first digit of the IP score designates dust protection, the second designates water protection. A water protection score of 5 or above helps protect your fixtures from water intrusion.

MyLEDLightingGuide offers IP ratings of IPx5 and IPx6. This allows you to install these fixtures outdoors, exposed to the elements, if required.

3. High Voltage - up to 480V

 

 

100V - 277V
277V - 480V

Are you trying to replace Shop fixtures that up to 480 Volts? We have solutions that cover these higher voltage installations. Our constant current drivers are equipped to handle everything from 100 Volts up to to 480 Volts (standard driver in our kits are 100V-277V). We can handle single or 3-phase power as well. 

4. Color Temperature Options

 

4000K
5000K

In layman's terms, color temperature describes the color appearance of light. Most white light produced by light sources has a tinge of other colors in it. Warm white light colors have a yellow/red/orange glow while cool white lights have a blue tint to them. Between cool light and warm light lies daylight white, the most popular of all light colors.

Which CCT Is Suitable For Your Application?

 

  • 4000K to 4500K: This light is white in appearance. It has hints of warmness, and is a good replacement for fluorescent bulbs. 
  • 5000K to 5500K: This light has a daylight-white quality to it and a blue tint. It's used in work areas where complex tasks occur. It is a great replacement for Metal Halide lighting. It is not the harsh blue light that tends to start above 5500K.

MyLEDLightingGuide Pro Tip

The Right Color Temperature

If you are replacing Metal Halide, choose 5000K. If you want something slightly warmer, then 4000K is a good option. Stay away from anything over 5500K or less than 4000K.

5. Light Quality: Color Rendering Index

70 CRI
80 CRI
90 CRI

 

Color rendering index defines the color of light. It tells us how well a light source will reveal the colors of items compared to sunlight (the ideal light source). When it comes to HID lamps, people usually complain about one thing: poor light color. Light color is important in low bay fixtures. It has a huge impact on clarity and contrast.

Most of our LED fixtures are offered between CRI 70 and 85. We can special order almost any CRI you might need. Typically, for general purpose lighting, 70 CRI is all you need.

MyLEDLightingGuide Pro Tip

What CRI do you need?

For the most part, 70 CRI will work perfectly. If your shop requires high color identification,  then choose a higher CRI in the 80-90+ range.

6. Beam Angles: Proper Light Distribution

45°
90°
120°

 

The beam angle is what determines the distribution of light. A wide beam angle produces softer light and distributes it better to different areas of a room.

A narrow beam angle produces concentrated light good for accent lighting. It makes the light more intense and focused.

Our LED shoplights are available in a range of beam angles: from 15° (narrow) to 120° (wide). For lower ceiling applications, we recommend a wide beam distribution to offset the lower ceiling mounting heights. Not sure? We can take all the risk out of purchasing LED by doing a free photometric report with one of our fixtures to find the proper light distribution.

7. Lighting Controls

 

Motion Sensors
Daylight Harvesters
Smart Controls

Light Control Features

According to Energy Star, waste accounts for 30% of all energy utilized in buildings. Light systems can help enhance energy-saving measures through light control features. Light controls can also increase security while enhancing the comfort of the occupants.

While LED shop lights can help save up to 80% in energy costs, light controls can also help cut down on energy wastage. Use light controls to enhance energy efficiency and control of the lighting.

    MyLEDLightingGuide Pro Tip

    Some controls need dimming

    If you need a control, then you may need a 0-10V dimmable LED driver that works in coordination with your control. For example, some motion sensors can dim the light when there is no detection of motion. To do so, the led driver must be capable of dimming. Not all LED drivers are dimmable.

    How to Choose LED Shop Lights

    Shop Lights

    Choosing the right fixture for your application can create high-quality, bright lighting. It can impact the safety of your workers and the efficiency of the tasks they perform.

    Before choosing your lighting, you should first of all know:

    • The mounting height of your fixtures
    • The amount of time the operation your shop lights run
    • Retrofitting older inefficient shop lights with energy-efficient LED shop lights

     

    When you should consider LED Shop Light Fixtures?

    If your ceiling heights are over 20 ft high, then consider installing a high bay fixture. These fixtures provide high-quality, powerful light that designed for large areas. They are also used to illuminate warehouses, gyms and recreational facilities.

    Shop-Fixtures provide light with little glare that illuminates smaller areas. Conventional fluorescent fixtures use a prismatic reflective lens or frosted lens to create diffused light. This is perfect for casting light on elevated objects or shelves.

    Omni-directional lamps use lenses and optics to direct light to task areas. Use Low bays for spaces with 12 ft to 20 ft high ceilings. They produce less lumens than their high bay counterparts.

     

    LED Conversion Guide

    Before (left) and After (right) conversion to our LED Shop Lights.

    What to Look for When Buying Commercial Shop Lights

    Light Output

    The measurement of light output from LED is lumens. Before , conventional light sources purchased lights according to watts. The higher the wattage, the brighter the bulbs were. Lumens were of little concern back then. But with the introduction of low-wattage, high quality lighting, lumens became more important.

    LED shop-lights have become efficient, providing low wattage high quality light and lumens. The lights have also become more affordable. LEDs now offer superior light for less than half the wattage of conventional lights. Watts, as a measurement for quality light, has become invalid. Lumens (and luminous efficacy) have taken over.

    To know how bright a light source is, there are a few things you should keep in mind:

    • The brightness of the light at its source
    • How much of the light illuminates objects a distance away from the light source

      MyLEDLightingGuide Pro Tip

      How much light is enough? How much is too little?

      That's where we can help. Running a photometric light design can show light levels and uniformity. We provide this as a free service to you.

      Don't Want to Miss Anything?

      Be the first to get updates and information about our products and services.

       

      Copyright © 2008 - 2019 · MyLEDLightingGuide · All rights reserved.

      Facebook Twitter  PInterest