30W | 45W | 60W LED Retrofit - Replace 100W-250W Metal Halide and HID 30W | 45W | 60W LED Retrofit - Replace 100W-250W Metal Halide and HID MLLG-LED-RETRO5-[Watts]-[Color]-[HV] MyLEDLightingGuide MyLEDLightingGuide

30W | 45W | 60W LED Retrofit - Replace 100W-250W Metal Halide and HID

1 2 3 4
DesignLights Consortium 10 year warranty Quick Ship

MyLEDLightingGuide's 30W | 45W | 60W LED Retrofit Kit can be simply retrofitted into your existing fixtures replacing 100W-250W Metal halide. 1000's in stock. Easy to install. Let us help you get your rebate!

This product is optionally available under BAA (Buy America Act).

Part NumberWattsLumensReplaces

Lumens Per Watt165
Voltage100-277V [D] | 347-480V [HV]
Frequency50/60 hz
Life Hours100,000 (L70) hours | 50,000 hrs - driver
Color Temperature4000K | 5000K
Beam Angle120°
Optics120° Standard
Operating Temperature-25°C to +55°C
MountingMultiple mounting options
Dimensions4.75" L x 4.75" W x 1.9" H
Warranty10 years

MyLEDLightingGuide's Series of Mini Sized Retrofit / Replacement Kits can replace up to 250 Watt Metal Halide or High Pressure Sodium in your existing fixture with a simple and easy to perform retrofit process. Our Mini Series Kits are extremely energy efficient and are DLC Premium Qualified meaning it meets higher lumen efficiency standards and outperforms those products that are only DLC Standard Qualified. These kits are 20-30% brighter than DLC Standard Kits.

Up to 165 lumens per watt, depending on the chosen color temperature. We recommend 5000K as the perfect replacement for Metal Halide. These kits come available with multiple mounting options. Our kits do not come with a socket adapter as this is an unsafe mounting option and is not allowed under the DLC Premium Quality certification.

The patented heat sink design provides advanced cooling which will ultimately extend the life of the product. Compare our retrofit head side by side with a competitive product. Run them both for an hour and touch the heat sink. You will be surprised how much cooler ours is. L70 hours exceed 100,000 hours. Backed by a 10 year head and 5 year driver warranty.

LED Mini Retrofit Kit installed inside a canopy light

LED Mini Retrofit Kit installed inside a Wall Pack

Our Mini Series LED Bulb and Ballast Replacement Kits are perfect for a variety of fixtures including:

  • Cobra Head and Street Lights
  • Parking Lot lights and Area Lights
  • Flood Lights
  • Wall Packs
  • Recessed Can Lights
  • Low Bays, Canopies and Garage Lights


Please note: reflector of fixture must be removed as part of the installation process of this product. The reflector is not needed because LED is directional light and there is no light to reflect. Removing the reflector also increases the available cooling area inside the fixture.

Technical Highlights:

  • New patent pending heat sink with side flow cooling technology - the first in its kind for LED retrofits - provides superior performance and cooling
  • Advanced circuit design
  • Top quality UL PCB board
  • Latest Nichia LED Chipset
  • Intelligent thermal control with auto recovery
  • short circuit / over current / over voltage protection.
  • 165 lumens/watt!
  • 30 watt led bulbs
  • 45 watt led bulbs
  • 60 watt led bulbs

What these LED Conversion Kits replace:

  • 70w HID replacement
  • 100w HID replacement
  • 150w HID replacement
  • 175w HID replacement
  • 200w HID replacement
  • 250w HID replacement

Easy Installation Steps:

  1. Remove bulb, ballast, reflector and socket from existing fixture.
  2. Install mounting arm system using the mounting holes of the removed socket
  3. Slide the retrofit head onto the mounting arm, and attach the safety wire
  4. Install the driver in the space where the ballast was installed.
  5. Connect the black and red wires of the driver to the black and red wires of the retrofit head
  6. Connect the input wires to the power cord coming into the fixture.


  • 347V-480V
  • 4000K
  • BAA (Buy America Act)


  • Our Mini Series Retrofits wins in life rating, wattage savings, payback, CRI, and the ability to retrofit in 99% of existing Metal Halide and High Pressure Sodium fixtures.
  • LED Source: Nichia Corporation
  • Beam Angle:  120°
  • IP Rating: these units are not IP65 or above rated, they need to be installed inside an IP65 if used outdoors or in a wet environment.
  • Driver: Meanwell 100-277V or 480V High Voltage
  • Certifications: ETL, CE, ROHS
  • DLC Premium Qualified
  • Up to 250W HID replacement


Product Photometrics

Energy Savings

Retrofitting 150W HID

30 LED Watts replacing 150 Watts for 12 hrs/day 365 days/yr saving 624 kw/year *
Cost per kw/hSavings per year
* includes ballast draw

Retrofitting 175W HID

45 LED Watts replacing 175 Watts for 12 hrs/day 365 days/yr saving 684 kw/year *
Cost per kw/hSavings per year
* includes ballast draw

Retrofitting 250W HID

60 LED Watts replacing 250 Watts for 12 hrs/day 365 days/yr saving 996 kw/year *
Cost per kw/hSavings per year
* includes ballast draw



About Us |  Customer Service |  Privacy Policy |  Terms Of Use |  SiteMap

Facebook Twitter PInterest Our Blog

Copyright © 2008-2019 is owned by DRK Enterprises LLC. All Rights Reserved.