Select Page

We Have Stock • We Can Ship

LED's probably the biggest energy saving warehouse lighting solution on the market today. Metal halide or high-pressure sodium warehouse lights use a lot more electricity and require a lot more maintenance. They don't work well with motion sensors, or are very difficult to dim.

There are many benefits of LED Warehouse  Fixtures vs Metal Halide, HPS or fluorescent lights. These include energy savings up to 75%,  4 to 5 time increased lifespans, decreased maintenance costs and improved light quality.

led ufo


led linear high bay fixture for warehouses

LED Linear

High Power

led high voltage

High Voltage



LED Watts

Replaces HID

Replaces T5



Color Temp



Showing all 36 results

Commercial LED Warehouse Lighting

Led Recessed Lighting

How much will you save when you convert your Warehouse to LED

Here is the costs savings you can expect if you convert your 400W HID  light source over to LED. In the table below, we show the savings per fixture for every fixture converted over per year. It assumes a run rate of 12 hours per day. We chose a 150W LED Fixture, but what you need may be less than this.

Here is the costs savings you can expect if you convert your 1000W HID equivalent lights over to LED. In the table below, we show the savings per fixture for every fixture converted over per year. It assumes a run rate of 12 hours per day. We chose a 320W LED Fixture for this example.

150 Watts LED replacing 400 Watts HID

12 hrs/day 365 days/yr saving 1358 kw/year *

Calculated savings is per fixture

If your cost per kw/h isYour savings per year

* includes ballast draw 

320 Watts LED replacing 1000 Watts HID

12 hrs/day 365 days/yr saving 3635 kw/year *

Calculated savings is per fixture

If your cost per kw/h isYour savings per year

* includes ballast draw

Why choose MyLEDLightingGuide Warehouse Lights?

1. Efficacy (Lumens Per Watt)

130 lm/w
150 lm/w
180 lm/w

Luminous efficacy is the true measure of a bulb’s efficiency. It indicates the lumens produced for every watt of electricity consumed. LEDs are more efficient than traditional bulbs with a higher luminous efficacy. High quality LEDs have awesome efficacy ratings. We have fixtures that are rated between 130 and 180 lumens/watt. We can help you choose the right efficiency.

* Trade off between initial cost and long term savings?

A higher efficiency LED product costs more than lower efficiency units. The savings over the life of the product is more than the initial investment needed to upgrade. So if you're looking to maximize savings when converting to LED, choose the higher efficiency product.

2. Many solutions to replace 250, 400 and 1000W HID


MyLEDLightingGuide offers many styles (ufo or linear), wattages, optics and voltage options to meet ANY requirement you have. We can produce from 5000 to 100,000 lumens per fixture, enough for 15 ft ceilings or 40 ft tall ceilings. We have many optic packages to make sure you building is not only bright, but the light is properly distributed and uniform.

* How do I know what light will work the best?

You don't. But we can start with a layout of your building and load it into our lighting software. Then we discuss with you your lighting requirements and then use the software to tell us what fixture, how many watts and lumens, and what optics will best suit your needs.

3. High Voltage up to 480V



100V - 277V
277V - 480V

Are you trying to replace fixtures that are higher voltages, 277V to 480V? We have solutions that cover these higher voltage installations. Our constant current drivers are equipped to handle everything from 100 Volts up to to 480 Volts (standard driver in our kits are 100V-277V). We can handle single or 3-phase power as well. Talk to our sales engineers and we can get your lighting situation taken care of.

* 480V High Voltage Options

Our higher voltage solutions handle both single phase and 3 phase 480V installations. If you have voltage above 277V, tell our sales engineers so we can specify the proper driver.

4. Color Temperature Options



Color temperature or correlated color temperature, measures the temperature of a light source. The Kelvin scale measures a bulb's color temperature. Bulbs with a low color temperature produce warm light (in the red, orange, and yellow spectrum). Those with a high color temperature produce cool light (in blue and white spectrum).

We offer both 4000K and 5000K fixtures for indoor warehouse  lighting. Not sure which one you should select? We can help!

* LED Color Choice

To replace Metal Halide, 5000K is a great color choice. If you would like a warmer light, choose 4000K. HPS high bays are around 2300K. Moving to 4000K or 5000K will greatly improve the quality of indoor light.

5. Light Quality: Color Rendering Index

70 CRI
80 CRI
90 CRI


Color rendering index defines the color of light. It tells us how well a light source will reveal the colors of items compared to sunlight (the ideal light source). When it comes to HID lamps, people usually complain about one thing: poor light color. Light color is important in warehouse applications. It has a huge impact on clarity and contrast.

Most of our LED Warehouse fixtures are offered between CRI 70 and 85. We can special order almost any CRI you might need. 


Anything over 70 is good. In applications such as assembly work where fine detail is necessary, then select 80 to 90 CRI.

6. Beam Angles: Proper Light Distribution



The beam angle is what determines the distribution of light. A wide beam angle produces softer light and distributes it better to different areas of a room.

A narrow beam angle produces concentrated light good for accent lighting. It makes the light more intense and focused.

Our LED warehouse lights are available in a range of beam angles: from 15° (narrow) to 120° (wide).

7. Lighting Controls


Motion Sensors
Daylight Harvesters
Smart Controls

Motion Sensors and other controls can dramatically reduce lighting costs by turning off or dimming the lights when people leave the area.

PIR and microwave motion sensors can be added to turn the lights on when motion is detected and off / dimmed when no activity is detected. To dim, the bay fixtures need a 0-10V dimmable driver. Unlike traditional lighting, dimming LED fixtures is relatively simple and does not affect the life of the bay fixture.

* Controls for Warehouse Lighting can save money!

If you have areas of the warehouse that has limited traffic, consider adding a motion sensor. You can either turn off the lights or dim them down significantly. And this will save you even more money monthly. Remember this - if you want to dim the lights, your fixture will need a dimmable LED Driver. Ask our sales professionals to help pick the right fixture!

8. Reduce Energy Costs and Maintenance Costs dramatically




Reduce energy costs up to 75%

Our energy-efficient indoor high-bays reduce commercial costs and becomes practical and sustainable. With energy savings up to 75%, you can reduce a tremendous amount of energy consumption. LEDs have longer lifespans. We can add motion sensors to turn off or dim the light source when no activity is detected.

* Paybacks after conversion are quick!

This is dependent on the 1+1+1 rule with LED payback – Hours of Use + Cost of Electricity + Rebates. Rebates may be the least important of the three. High hours of use and high cost of electricity will dwarf the benefits of the rebate. Everyone likes a rebate. We have created many proposals where payback was under 1 year even without rebates.


Decrease maintenance costs

Our efficient warehouse lights have L70 ratings that last upwards of 100,000+ hours. Less bulb replacement saves costs in factories and warehouses. This cost saver is often overlooked, but saves a tremendous amount of money.

9. Rugged fixtures that will last for years!

IK08 Impact Rating 

Our warehouse bay fixtures withstand extreme cold and hot temperatures without decreasing lifespan. This is possible through our large heat sinks, designed to keep the lights cool. UFO fixtures have heavy duty heat sinks that are perfect for impact zones. Our warehouse bay fixtures are vibration resistant. This allows them to maintain a long lifespan in harsh environments.

* Impact Rating for UFO Warehouse Fixtures

Our UFO Warehouse LED Fixtures are rated at IK08 on a scale of IK01 to IK10. This ensures reliability in environments where impacts may occur

10. Easily convert F54T5HO to LED


Tired of changing tubes? Tired of tubes that don't last as long as they should? Replacing F54T5HO Fluorescent fixtures is simple and easy. Each T5 tube produces approximately 4000 lumens each. The light is not directional, so effective lumens is less than the 24,000 combined lumens for a 6 tube fixture. We replace these fixtures with a cost effective, maintenance free equal LED solution.


How many LED lumens to replace 400W Metal Halide Warehouse Light?

We have found that a range between 18,000 and 30,000 offers the best lumen packages to replace 400W HID. For an answer specific to your warehouse we suggest doing a photometric study, which we provide for free.

How many LED lumens to replace 1000W Metal Halide Warehouse Light?

This is a very subjective question. Best can change based on the specific needs of the customer. What is best for one area may not be best for another. Conditions may exist that requires the use of a specific fixture over another. It may be because of light levels, distribution, heat, mounting height. Or it may be in a hazardous location.

We can help you determine the best High Bay LED Light for your application. We can provide you with the guidance to make the best selection.


What are the best color temperatures to use for LED Warehouse Lights?

The two most popular is 4000K and 5000K. 5000K is a good replacement for Metal Halide for warehouse fixtures. If you are currently using 4000K Fluorescent tube or HPS, 4000K would be a good option.

How many LED high bay lights do I need in my warehouse?

The best way to do this is to create a lighting layout using your warehouse. A lighting layout uses buildings dimensions and other factors and creates a software representation. We can then add your existing light locations and model this with different light options.

Request a Free Warehouse Lighting Plan

Don't forget the Warehouse Parking Lot

Don't forget the parking lot. LED Parking Lot Lights will make your outdoor space bright, safe and reduce your energy spend and maintenance costs. LED Wall Packs mounted on exterior walls provide excellent security lighting. Adding photocells to your outdoor lights allow them to go on at dusk and off at dawn. Adding motion sensors will allow you to dim your exterior LED lights to save even more money. 

Don't Want to Miss Anything?

Be the first to get updates and information about our products and services.

Contact a Lighting Specialist

(888) 423-3191 toll-free phone
Weekdays 8am - 5pm EST


Corporate Headquarters

MyLEDLightingGuide / DRK Enterprises
1 Chestnut Street, 4M
Nashua, NH 03060

Based on 19 reviews
powered by Google

Copyright © 2008 - 2020 · MyLEDLightingGuide · All rights reserved.

Facebook Twitter  PInterest