120W Billboard Retrofit Kits - 400w Metal Halide Retrofit

MyLEDLightingGuide's 120 Watt Billboard Retrofit Kit can replace up to 400 Watt Metal Halide or High Pressure Sodium in your existing fixture with a simple and easy to perform retrofit process. Our 120 Watt Billboard Retrofit Kit is extremely energy efficient and is DLC Premium Qualified meaning it meets higher lumen efficiency standards and outperforms those retrofit kits that are only DLC Standard Qualified. These kits are 20-30% brighter than DLC Standard Kits. Up to 155 lumens per watt, depending on the chosen color temperature. We recommend 5000K as the perfect replacement for Metal Halide. These kits come available with multiple mounting options. Our kits do not come with a socket adapter as this is an unsafe mounting option and is not allowed under the DLC Premium Quality certification.

The patented heat sink design provides advanced cooling which will ultimately extend the life of the product. Compare our retrofit head side by side with a competitive product. Run them both for an hour and touch the heat sink. You will be surprised how much cooler ours is. L70 hours exceed 100,000 hours. Backed by a 10 year head and 5 year driver warranty. Enjoy your energy savings with MyLEDLightingGuide's 120W 18,660 lumens LED Retrofit Kit, perfect for pole mounted, high bay, street light or parking lot applications. We have 11 LED Retrofit Kit Models to meet every need you might have.

Please note: reflector of fixture must be removed as part of the installation process of this retrofit kit. Reflector is not needed because LED is directional light and there is no light to reflect. Removing the reflector also increases the available cooling area inside the fixture.

Technical Highlights:

• New patent pending heat sink with side flow cooling technology - the first in its kind for LED retrofits - provides superior performance and cooling
• Advanced circuit design
• Top quality UL PCB board
• Latest Nichia LED Chipset
• Intelligent thermal control with auto recovery
• short circuit / over current / over voltage protection.
• 120 Watts 18,600 lumens
• 155 lumens/watt - most efficient 120 watt retrofit kit on the market today!

Easy Installation Steps:

1. Remove bulb, ballast, reflector and socket from existing fixture.
2. Install retrofit kit mount arm system using the mounting holes of the removed socket
3. Slide the retrofit kit onto the mounting arm, and attach the safety wire
4. Install the driver in the space where the ballast was installed.
   
5. Connect the black and red wires of the driver to the black and red wires of the retrofit kit
6. Connect the input wires to the power cord coming into the fixture.

• Our 120 Watt Billboard Retro Kit wins in life rating, wattage savings, payback, CRI, and the ability to retrofit in 99% of existing Metal Halide and High Pressure Sodium fixtures.
• LED Source: Nichia Corporation
• Beam Angle:  120 degrees
• IP Rating: these retrofit kits are not IP65 or above rated, they need to be installed inside an IP65 if used outdoors or in a wet environment.
• Driver: Meanwell 100-277V or 480V High Voltage
• Certifications: ETL, CE, ROHS
• DLC Premium Qualified
• Up to 400w Metal Halide LED Replacement
  

120 LED Watts replacing 400 Watts for 12 hrs/day 365 days/yr saving 1489 kw/year *

* includes ballast draw