What is a Carbon Footprint?
A person’s carbon footprint is the total set of greenhouse gases like carbon dioxide, methane etc emitted by him and his activities. Similarly carbon footprints can be calculated for a product, an event or an organization. The carbon footprint depends on three factors
The nature of greenhouse gas released - carbon dioxide is the most commonly maligned green house gas but it is not the only one. Methane emitted by cattle is a much more potent green house gas. To solve the problem caused by the different green house potential of different gases they are converted to their respective carbon dioxide equivalents.
The amount of gas released and the place where the green house gas is released. Thus airplanes that release green house gases at a high altitude are considered to have a carbon footprint that is 1.9 times larger than if the same quantum of these gases had been released at sea level.
The carbon footprint is now calculated by using a cradle to grave approach i.e., it is a holistic calculation involving production, transport, usage and disposal for a product for example.
Why carbon footprint?
Thinking about carbon footprints is a simple way of thinking about ways and means of reducing environmental pollution. By reducing ones carbon footprint each one of us can contribute to making the earth a safer, better place to live in.
Of more immediate concern to skeptics may be the global negotiations in Copenhagen aimed at reducing greenhouse gas emissions in industrialized countries. It is likely that the billions of dollars that will be needed to enforce these cuts may have a debilitating effect on the economy or cause many more manufacturing jobs to migrate to less developed nations. It therefore makes sense to invest in technologies that would reduce the carbon footprint allowing developed countries to continue to grow without a commensurate increase in green house gas emissions.
Reducing the Carbon footprint – Follow the three R’s.
There are many ways in which the carbon footprint may be reduced – by eating less of animal products, flying less often, driving fewer miles in a fuel efficient vehicle and preferable in a car pool, buying fewer clothes, installing energy efficient equipment and many others. Remember the three R’s – “Reduce, Reuse and Recycle”.
Carbon footprint and electricity
Estimates suggest that almost half of our carbon footprint is due to electricity and 17 % is due to lighting alone. We depend on electricity to meet several of our daily requirements. Electricity in turn can be produced by coal, gas, or nuclear plants or by renewable sources like geothermal, hydroelectricity solar and wind. The carbon footprint of a household or person is directly correlated with the amount of electricity consumed and the source of the electricity. The table below shows the grams of CO2 equivalent produced when 1 KWH of electricity is produced from different sources.
||Grams of CO2 produced for every 1 KW generated
Most of the electricity is produced by fossil fuel burning plants and once the losses in transmission and distribution are accounted for it is estimated that for each KWH of electricity that a house hold consumes releases 830 grams of carbon dioxide equivalents in the air.
Save electricity – reduce carbon emissions
Since close to 830 grams of carbon equivalents are released in the consumption of 1 KWH of electricity it follows that this carbon emission can be reduced if electricity consumption is reduced. Replacing an old refrigerator, installing movement sensors, unplugging instruments when not in use are some of the methods one may employ depending on the availability of time and monetary resources. However there is one investment in energy saving instruments that is certain to generate a handsome return.
Replacing Metal Halide with LED
LED lights not only consume a fraction of the energy consumed by metal halide, they have the double benefit of lasting almost forever and containing no mercury.
|Power Consumption (watts)
|Kwh (Units of Electricity Used Each Hour)
|Hours of Operation Per Day
|Carbon Emissions (tons) per year/lamp
|Reduction in Carbon Footprint (tons) / lamp
By doing nothing except installing LED's in your business you can dramatically reduce the amount of carbon emissions that is produced and released into the atmosphere. Think about that, converting one 400 Watt Metal Halide over to LED reduces carbon emission by over a ton per light per year. Now lets put it into economic terms, the above example also is a 75% reduction in your electricity bill. Now do we have your attention?
New or Retrofit - It Depends When Converting to LED
As a facility manager or business owner, you can convert over to LED but keep your investment in your fixtures. Outdoors, you can replace Metal Halide our LED Retrofit Kits. It's as simple as a bulb and ballast replacement. Indoors, you can replace fluorescent tubes with ballast compatible LED Tubes. So converting to LED doesn't have to be difficult or costly if you understand how you can retrofit. Read more about retrofitting vs replacing here.
Click here if you want to know more about the LED Kits that can replace Metal Halide.
Click here if you want to know more about the LED Kits that can replace fluorescent tubes.
Want to see how much LED can save you? Click here to try our new and simple to use Energy Savings Calculator