LED WallPack 98W - 7700 Lumens

Catalog #: MG-PA25-98W

98 Watt LED WallPack light replaces 100-400W HID Fixture. 100,000 hours with 70% lumens maintenance and 5 year limited warranty.

Integrated LED system for optimum lifetime performance of up to 50 years.
Ideal for Garages, Parkades, Warehouses, apartments or any where you need light from an existing wall .
High power LED Engines with optics
Instant on/off
UL Listed and made in the USA.
Reduced energy consumption and operating costs by up to 80%.
Maintenance free operation - lasts up to 10 times longer than conventional lighting
Solid state design and circuitry
Great for shock and high vibration environments
50-80% reduced energy usage. Save money on your utility bill
No humming or flickering.
Cool beam - Does not produce Ultra Violet (UV) light or IR.
Unique design with anodized silver housing for cooler operation and extended lamp life.
Environmentally friendly – fully recyclable, no mercury or other hazardous materials.
Includes new wall mount fixture

Download LED Catalog (PDF)

Adobe Reader is required to view and print these documents.
Don't have Adobe Reader installed? Download a free copy here

Color rendering: For a light source, the extent of the agreement between the perceived color of a surface illuminated by the source and that of the same surface illuminated by a reference source under specified viewing conditions, measured and expressed in terms of the chromaticity coordinates of the source and the luminance of the source in agreed spectral bands.

Lumens: also known as luminance. It is a measure of the amount of light a bulb produces near the beginning of usage.

Luminous efficacy: The ratio of the total emitted luminous flux, in lumens, to the total electric power consumption in watts.

Luminous flux: The rate of flow of light per unit of time, especially the flux of visible light, expressed in lumens.

Luminous intensity: The luminous flux density per solid angle as measured in a given direction relative to the emitting source. The customary unit is candlepower, the SI unit is the candela.

Life Hours: an average rating in hours when approximately 50% of the bulbs in the test fail. The testing assumes normal operating conditions.

Color Temperature: The measurement of color expressed in Kelvin (K). The lower the Kelvin rating, the “warmer” or more yellow the light. The higher the rating, the “cooler” or more blue the light. For residential use, we recommend our day white and natural white colors.

Glare: The sensation produced by brightness within the visual field that is sufficiently greater than the luminance to which the eyes are adapted. Glare can cause blurred vision, discomfort, headaches or loss in visual performance and visibility.

Voltage: a measurement of electrical potential and is the force that pushes electrical current through a conductor.

Wattage: the rate at which energy is taken from an electrical source or dispersed by a load. LED Bulbs are rated in Watts to indicate energy consumption.

Illuminance: The density of luminous power, also called “illumination.” One lumen of luminous flux uniformly incident on 1 square foot of area produces an illuminance of 1 footcandle. In SI units, one lumen of luminous flux uniformly incident on 1 square meter of area produces an illuminance of 1 lux.

Ingress protection rating: The IP code or IP rating defined in the international standard IEC 60529 that classifies the level of protection that electrical appliances provide against the intrusion of solid objects or dust, accidental contact, and water.

$700.95

Quantity:

Tell A Friend

	Click Here to learn about LED color temperatures.
	IMPORTANT: Do NOT use non-dimmable bulbs with dimmer switches. Use with any type of dimmer or other current/voltage control device with a non-dimmable bulb will VOID the WARRANTY.

• Atlanta, GA	• Cape Coral, FL	• Columbus, OH	• Dallas, TX
• Denver, CO	• Portland, OR	• Portsmouth, RI	• Sacramento, CA

LED Lights