LED PAR 30 Light 12W

Catalog #: MLLG-PAR30

12W Flood PAR LED Lighting. Replaces 100W Incandescent/Halogen. 704 lumens. 50,000 hours with 3 years limited warranty. UL, cUL, FCC, ROHS, CE, Energy Star, C-TICK, SAA

7 LEDs
Replacement of 100W Halogen PAR.
Excellent optic structure: Less lumen loss and better illuminating effect.
Stepless dimming from 10%-100%, Work well with most of existing dimming system. Non-flickering. Must use with approved dimmer that is designed for LEDs.
Stable and Efficient LED Driver. Efficiency >= 85%, PF>0.92.
Dust-proof design: IP6X. Designed for industrial environments.
UL and cUL Listed. SAA Rated. Energy Star Rated. CREE LEDs. Dimmable.

Please Note: We stock 4200K 45° but can special order all beam angles and colors. Minimum quantities apply on special orders. We keep limited supplies of special order items on hand.

Download Cut Sheet (PDF)

Adobe Reader is required to view and print these documents.
Don't have Adobe Reader installed? Download a free copy here

Color rendering: For a light source, the extent of the agreement between the perceived color of a surface illuminated by the source and that of the same surface illuminated by a reference source under specified viewing conditions, measured and expressed in terms of the chromaticity coordinates of the source and the luminance of the source in agreed spectral bands.

Lumens: also known as luminance. It is a measure of the amount of light a bulb produces near the beginning of usage.

Luminous efficacy: The ratio of the total emitted luminous flux, in lumens, to the total electric power consumption in watts.

Luminous flux: The rate of flow of light per unit of time, especially the flux of visible light, expressed in lumens.

Luminous intensity: The luminous flux density per solid angle as measured in a given direction relative to the emitting source. The customary unit is candlepower, the SI unit is the candela.

Life Hours: an average rating in hours when approximately 50% of the bulbs in the test fail. The testing assumes normal operating conditions.

Color Temperature: The measurement of color expressed in Kelvin (K). The lower the Kelvin rating, the “warmer” or more yellow the light. The higher the rating, the “cooler” or more blue the light. For residential use, we recommend our day white and natural white colors.

Glare: The sensation produced by brightness within the visual field that is sufficiently greater than the luminance to which the eyes are adapted. Glare can cause blurred vision, discomfort, headaches or loss in visual performance and visibility.

Voltage: a measurement of electrical potential and is the force that pushes electrical current through a conductor.

Wattage: the rate at which energy is taken from an electrical source or dispersed by a load. LED Bulbs are rated in Watts to indicate energy consumption.

Illuminance: The density of luminous power, also called “illumination.” One lumen of luminous flux uniformly incident on 1 square foot of area produces an illuminance of 1 footcandle. In SI units, one lumen of luminous flux uniformly incident on 1 square meter of area produces an illuminance of 1 lux.

Ingress protection rating: The IP code or IP rating defined in the international standard IEC 60529 that classifies the level of protection that electrical appliances provide against the intrusion of solid objects or dust, accidental contact, and water.

$42.95

Quantity:

	IMPORTANT:Do NOT use non-dimmable bulbs with dimmer switches. Use with any type of dimmer or other current/voltage control device with a non-dimmable bulb will VOID the WARRANTY.

LED Lights

Induction Lights

LED Q&A

LED PAR 30 Light 12W