LED A19 Dimmable 3000K Contractor Grade

Catalog #: 19220

LED A19 3000K Dimmable Bulb. Replaces Incandescent Lighting. 50,000 hours with limited 5 year warranty. Made in the USA. ARRA Compliant. Industrial Strength LED. Contractor Grade.

Excellent Color Rendering, > 90 CRI
Saves up to 95% energy when compared to halogen lamps
Eliminates the need for ongoing re-lamp frequency with 50,000 hours life
Qualifies for Federal, State, Local government and utility based deductions
Dimmable
Exceeds Energy Star Requirements
TUV certified and tested to UL 1993 & UL 8753
IES LM79 & LM80 Approved
Exceptional light distribution
Integrated high efficiency driver
Enhanced passive cooling system allows for reduced junction temperatures, extending the life of the lamp
Complies with ANSI standard A19 form factor
No heat emitted in direction of light
No UV or IR radiation
FCC Certified

Download Cut Sheet (PDF)

Download LED Catalog (PDF)

Adobe Reader is required to view and print these documents.
Don't have Adobe Reader installed? Download a free copy here

Color rendering: For a light source, the extent of the agreement between the perceived color of a surface illuminated by the source and that of the same surface illuminated by a reference source under specified viewing conditions, measured and expressed in terms of the chromaticity coordinates of the source and the luminance of the source in agreed spectral bands.

Lumens: also known as luminance. It is a measure of the amount of light a bulb produces near the beginning of usage.

Luminous efficacy: The ratio of the total emitted luminous flux, in lumens, to the total electric power consumption in watts.

Luminous flux: The rate of flow of light per unit of time, especially the flux of visible light, expressed in lumens.

Luminous intensity: The luminous flux density per solid angle as measured in a given direction relative to the emitting source. The customary unit is candlepower, the SI unit is the candela.

Life Hours: an average rating in hours when approximately 50% of the bulbs in the test fail. The testing assumes normal operating conditions.

Color Temperature: The measurement of color expressed in Kelvin (K). The lower the Kelvin rating, the “warmer” or more yellow the light. The higher the rating, the “cooler” or more blue the light. For residential use, we recommend our day white and natural white colors.

Glare: The sensation produced by brightness within the visual field that is sufficiently greater than the luminance to which the eyes are adapted. Glare can cause blurred vision, discomfort, headaches or loss in visual performance and visibility.

Voltage: a measurement of electrical potential and is the force that pushes electrical current through a conductor.

Wattage: the rate at which energy is taken from an electrical source or dispersed by a load. LED Bulbs are rated in Watts to indicate energy consumption.

Illuminance: The density of luminous power, also called “illumination.” One lumen of luminous flux uniformly incident on 1 square foot of area produces an illuminance of 1 footcandle. In SI units, one lumen of luminous flux uniformly incident on 1 square meter of area produces an illuminance of 1 lux.

Ingress protection rating: The IP code or IP rating defined in the international standard IEC 60529 that classifies the level of protection that electrical appliances provide against the intrusion of solid objects or dust, accidental contact, and water.

$42.30

Bulb Option

A19 5.9W 385 lumens
A19 8.0W 565 lumens (+$5.00)

Quantity:

Tell A Friend

	Click Here to learn about LED color temperatures.
	IMPORTANT: Do NOT use non-dimmable bulbs with dimmer switches. Use with any type of dimmer or other current/voltage control device with a non-dimmable bulb will VOID the WARRANTY.

• Atlanta, GA	• Cape Coral, FL	• Columbus, OH	• Dallas, TX
• Denver, CO	• Portland, OR	• Portsmouth, RI	• Sacramento, CA

LED Lights

Induction Lights

LED Q&A

LED A19 Dimmable 3000K Contractor Grade

Regional Offices