LED Education
General Led Info
* The True Cost of LED Lighting
* Save money on your utility bill
* The Death of the Light Bulb
* Why is my electricity bill so high?
* Busting Electricity Myths
* Color Rendering Index (CRI)
* Tackling Light Pollution with Outdoor Lights
* Pupil Lumens and their impact on the choice of lighting
* Understanding Color Temperature
* LED versus Traditional Lamps: A fight between unequals
* What is an LED?
* The 2007 USA Energy Bill
* What is the different between ETL and UL Listing?
* US Made Commercial LED lights
* What influences the lifespan of an LED Light?
* What is the IP rating system?
* Lighting Language - Basics
* Lighting Maintenance Factor
* (LED) Light Measurement Systems
* (LED) Technical Terms
Going Green
* Reduce your energy bill using Energy Saving Lights
* How to Reduce your Carbon Footprint
* What you need to know about Alternative Energy Sources
* Save Money with Energy Efficient Lighting
* Going Green I – Light, Food and Beverage Choices
* Why should schools be interested in reducing their energy consumption?
* LED's Role In Slashing Your Electricity Bill
* Light Management Systems - Upgrading the efficiency of Lighting Systems
Induction Lights
* What is induction lighting?
LED Street Lights
* What you need to consider with Street Lights
* The Cost of Street Lights
* Part I - The Complete Guide to LED Street Lights
* Part II - The Complete Guide to LED Street Lights
LED Tube Lights
* The Complete Guide to LED Tube Lights
* LED Tube Lights I - Why LED tubes are a good replacement for fluorescents
* LED Tube Lights II – Mercury from Recycled Fluorescent Tubes
Grow Lights
* Facts about Grow Lights
* Why we need to consider indoor gardening
LED Par Lights
* Understanding PAR Lights
LED Sport Lights
* High Quality USA LED Sports Lights
LED Lights for Business
* Lighting for your Farm and Ranch
* A Safer, Brighter, Better Home
* Lighting Strategies for Retail Stores
* Lighting for Commercial Companies – Sound Financial Sense and CSR
* The best lighting choice for hospitals
* Energy Efficient lights for Warehouse Applications
* How to Reduce Office Energy Costs
CFL's and Flourescent Lights
* LED vs CFL – An Exhaustive Comparison
* Settling the Mercury Emission Debate

LED versus Traditional Lamps: A fight between unequals

LED lights are far superior to and can easily replace traditional lamps with far higher light output. Two of the most important reasons for this are

  • Direct Light by a better Light Distribution Curve (the light is directed where it is needed)
  • Scotopic advantage of LED street lights (To learn more about the scotopic advantage enjoyed by LEDs you can refer to our articles on ‘Pupil Lumens’ and ‘LED street lights - part I and II’.)

There are several lumen traps that you must know about. Six of the most important lumen traps are
1)    Luminaire/ System efficiency
2)    Ballast and Driver efficiency
3)    Scotopic superiority
4)    Lumen Maintenance
5)    Uniformity of light distribution and light hotspots under traditional lights
6)    Color reproduction

This article is focused on a holistic comparison of the luminous output of LEDs and other competing technologies.
Led Light Fixtures


From Photon to Vision

The figure demonstrates why “Luminance” is important. Differences in installation height, air quality, electricity quality, reflectance of the surface mean that most lamps are rated for their Luminous flux or light output. Below is a systematic comparison of LED lights with competing technologies.

Luminous flux – Source efficiency versus System efficiency

Source efficiency is based on the amount of light produced by a lamp at room temperature. It is distinct from system efficiency that refers to the amount of usable light delivered to the target area. There are several causes why raw lumens produced by a light source are far higher than the actual light delivered on a surface.

Losses due to trapped light - Trapped light and reflection inefficiency are the first source of lower light output from traditional lamps.  As long as LEDs had not entered the scene all bulbs produced lights in a 360 degree sphere and the comparison was easy. LEDs changed all that with the directional nature of their light.


In a traditional bulb (incandescent, metal halide, HPS etc.) a considerable portion of the light output is directed upwards. This light must then be reflected down. The efficacy of the reflector in turn is determined by the quality of finish, operating conditions and ambient temperature. The quality of the reflector and, therefore, the amount of light reflected degrades over time. The actual amount of light coming out of a fixture is, thus, considerably lower.


An HPS lamp has a larger profile, a single source of light and a considerabel amount of light trapped in the reflector.


 An LED light by contrast has a small profile, several sources of light ensuring better light distribution. All the light is produced and directed downwards. There are no problems of reflector efficiency, aging of reflector coating and consequent loss in light output.


  HPS Lamps LED Lamps
Light output in Lumens / Watt 101 Lumens / watt 100 Lumens / watt
Trapped Light Up to 40% Nil
Available Lumens 60-80 Lumens / Watt 100 Lumens / Watt


Losses due to Cover and lenses – Lenses and glass covers are needed to direct light and to protect the bulb and reflectors from dust and other damage. Both LED light and traditional fixtures suffer from these losses.


  HPS Lamps LED Lamps
Light output in Lumen / watt 101 Lumens / Watt 100 Lumens / Watt
Trapped Light Up to 40% Nil
Available Lumens 1 60-80 Lumens / Watt 100 Lumens / Watt
Loss Due to glass cover and lenses 20% 20%
Available Lumens 2 48-64 Lumens/ Watt 80 Lumens / Watt


Losses due to operating temperature – The lumen output of LEDs is measured at 25 degrees but the operating junction temperatures of LEDs can be high, resulting in a 10 % decrease in light output. For the same reason LEDs are an excellent choice for outdoor lighting in cold climatic conditions as the junction temperature is closer to the optimum operating temperature.


  HPS Lamps LED Lamps
Available Lumens 3 43-57 Lumens / Watt 72 Lumens / Watt


Ballast and LED driver losses – Ballasts reduce efficiency by 20%. LED drivers are more efficient and reduce performance by 10% or less.


  HPS Lamps LED Lamps
Available Lumens 3 43-57 Lumens / Watt 72 Lumens / Watt
Ballast / Driver Loss 20% 10%
System Efficiency 35-45 Lumens / Watt 65 Lumens / Watt


Thus, traditional HPS bulbs are as efficient at producing light as LEDs. When one considers the impact of systemic deficiencies, LEDs stand miles ahead of the competition.

Not all Lumens are equal


Human eye responds better to shorter wavelengths of 510 and 550 nm. These are conspicuous by their absence in HPS lights. Each LED photopic Lumen is equivalent to 2.4 Scotopic lumens (For a detailed analysis of the relationship between photopic and scotopic Lumens please refer to our article on Pupil Lumens and The complete guide to LED street lights – part I). When it comes to Scotopic equivalent lumens HPS lamps are no match for LED lights with richer light spectrum.


Visual evidence of the superiority of LED lights

 A colleague sent the two pictures above. The image on the left shows illumination of a street with HPS lights while that on the right shows the impact of LED street lights. Several advantages of LED lighting systems are immediately visible. LED lights have significantly less glare when designed with a good light distribution curve (LDC), a more uniform light distribution, fewer shadows, and improved visibility. The best part is that this improvement is obtained with fewer lumens and 40 % or more savings in electricity and maintenance costs.

What Does The Office of Energy Efficiency and Renewable Energy (EERE) Say?

1)    Luminaire Efficiency - sample data from the EERE website LED lights reign supreme.

  HPS Metal Halide LED
System Watts 183 208 153
Initial Lamp Lumens 16,000 11,700 N/A
Downward Efficiency 70% 81% 100%
Downward Lumens 11,200 9,477 10,200
Luminaire Efficiency 61 Lumens/Watt 46 Lumens/Watt 67 Lumens/Watt


2)    Uniformity of light – LEDs win hands down


Power Consumption (Watts) 97 (lamp and ballast power) 72
Average Light Level (Foot candles) 3.5 3.6
Maximum Light Level (Foot candles) 7.5 5.1
Minimum Light Level (Foot candles) 1.3 2
Uniformity (ratio between maximum and minimum light levels) 6:1 2.7:1


Led Exterior Lighting


The picture shows the advantage of uniform lumen distribution achieved by LED outdoor lights. What actually happens is that the upward directed light in a traditional luminaire is reflected straight down. This causes a ‘hotspot’ to form right below the luminaire while areas further away from the bulb have poor light intensity. These hotspots can be clearly seen in the picture of the I 35 W bridge. In this case, the improvement in lighting was accompanied with a 13 % savings in energy consumption, long maintenance free life span and the possibility of pairing the LED Light fixture with smart energy saving technologies in the future.


Also, note the light intensity in different stretches of the road. The ends of the bridge (with several lanes of merging traffic) are lit by closely spaced 400 Watt HPS lights. The adjacent road on the left is lit by 20 Watt HPS lamps and the bridge itself is lit by 290 Watt LED lights. HPS lamps barely hold a candle to their modern challengers.


4)    Lumen Maintenance

Lumen maintenance is another area that decision makers need to consider. The human eye can adapt well to up to 30% reduction in light levels. When light levels fall below the 30 % threshold reduction in light levels become evident and vision is compromised. Thus, lights need to be designed based on average lumens over the useful life of a light.

Credit -DOE's Office of Energy Efficiency and Renewable Energy

A comparison of the lumen maintenance data of different types of lights is shown in the graph above. A summary of the abbreviations, common name, and life till 70% of peak light output levels is given below.

PSMH – Pulse Start metal halide – 12000 hours
CMH – Ceramic Metal Halide – 16000 hours
HPS – High Power Sodium – 24000 hours
LED – Light Emitting Diode – 50000 hours and more.

A pulse start metal halide lamp with a peak light output of 10000 lumens will require that the fixtures be designed for 7000 lumens. This would require compromises in lamppost height, ground coverage and reduced spacing of light fixtures resulting in increased costs. A long life LED light on the other hand, with a similar peak output would, need fixture design for 9000 lumens.

Color Reproduction - The subtle trap

In areas like car parking color discrimination is important to identify the right car and to instill a feeling of safety in the users of the facility. Parking facilities are increasingly opting for higher CRI lights to serve the needs of their clients. The comparative CRI of different lighting technologies are

  LPS HPS Metal Hailde LED
CRI 0 22 65 75 or higher



Uniform lighting with LED parking area lights, Light hot spots under HPS lights can be seen in the image above. The excellent color reproduction with LED lights can be evaluated by observing the color of the grass. (Public domain image from– The Office of Energy Efficiency and Renewable Energy http://apps1.eere.energy.gov/buildings/publications/pdfs/alliances/outdoor_area_lighting.pdf Photo credit - Beta Lighting)

Each LED light in the picture above produces 8040 lumens while HPS lamps on the right produce 19,000 lumens each. The picture tells quite a different story. Comparing plain lumens can clearly be highly misleading.

Perhaps, more important than the energy savings, reduction in carbon-dioxide emissions and the greener grass is the fact that users of parking facilities with LED lights reported a 300% increase in the feeling of safety! With LED lighting products from MyLEDLightingGuide becoming increasingly popular we believe that not just the users but climate scientists and vast human populations dependent on rain fed agriculture will find the world to be a safer place. Join the energy efficient lighting club. Choose energy efficient bulbs today and do your bit for the planet.

Did you find this content interesting and helpful? Maybe you can help us out and click on the Google Plus Symbol (g+1) at the bottom of this page.
Find it Contact Us
Privacy Policy
Terms Of Use
About Us
Customer Service
LED Lighting Info LED Return on Investment Calculator
Educational Articles
LED White Papers
Installation Photos

Facebook   Twitter   PInterest   Our Blog   Tumblr  
Security Site Security ECommerce Site Security
Any product listed on this site with the American Flag is a USA assembled product that may contain some non-USA made components.

Copyright © 2008-2016 MyLEDLightingGuide.com owned by DRK Enterprises Inc. All Rights Reserved.
Plagiarism Warning