|
62W LED Retro Unit 4700 Lumens
Catalog #: MLLG-LED-RET-2748-RKY
62W LED Retro Kits. Replaces 50-250W HID. 4700 lumens. 100,000 hours with 5 years limited warranty.
- This 62 Watt LED Retro unit wins in life rating, wattage savings, payback, CRI, and the ability to retrofit in 99% of existing HID fixtures
- This unit has a 100,000 hour life rated before any degradation.
- The perfect retrofit solution for up to 250W HID
- USA Made, ARRA Compliant
- LED SMART DRIVER with over temperature protection, shut down at critical temperature and under voltage lockout for power off or brownout.
- 0-10v Input Port.
- Yoke Screw in Socket with optional mogul base adapter.
- Multiple lensing options available for maximum light distribution, if needed.
- Multiple mounting positions for a broad range of narrow to spread symmetrical lighting distribution choices.
- Standard 5 year manufacturer warranty.
This fixture is extremely versatile and can be used to retrofit 95% of existing Metal Haide and High Pressure Sodium products in existence today. Along with a power supply ranging from 120V - 480V and custom installation plates, fixtures can be retrofitted with as many as 4 of these units to produce a wide variety of lighting options over and above what your existing lights produce. Special optics and lens are also available to customize the light output. 3-4 of these units installed in a high bay fixture can replace a 1000W HID bulbs (depending on installation parameters)
Download Cut Sheet (PDF)
Adobe Reader is required to view and print these documents.
Don't have Adobe Reader installed?
Download a free copy here
- Type: 62W LED Retro Kits
- Wattage: 62W
- CRI: 75
- Lumens: 4700lm
- Lumen Per Watt: 75.9
- Lumen Maintenance: @50,000 hrs: >90%
- Color Temperature: 5500K
- Beam Angle: 120°
- Optics: 25 | 50 | 75 | 360
- Life Hours: 100,000
- Replaces: 50-250W HID
- Working Voltage: 100-277 | 347-480
- Frequency: 50 / 60 hz
- THD: 20% Max
- Operating Temperature: -40°C to +45°C
- Dimmable: No
- Dimensions: 6" round
- Net Weight: 5
- Options:
Street Lights, High Bay Lights, Low Bay Lights, Wall Packs, Area Lights, Garage Lighting, many more retrofit options. Custom installations into existing fixtures available. Please call.
- Warranty: 5 years
** Replacement estimates may require Photometric evaluation. **
|
Merchant Rating
|
|
|
Customer Rating And Review
|
There is no customer review
|
|
|
Add a Review
|
|
|
- Color rendering: For a light source, the extent of the agreement between the perceived
color of a surface illuminated by the source and that of the same surface illuminated
by a reference source under specified viewing conditions, measured and expressed
in terms of the chromaticity coordinates of the source and the luminance of the
source in agreed spectral bands.
- Lumens: also known as luminance. It is a measure of the amount of light a bulb produces
near the beginning of usage.
- Luminous efficacy: The ratio of the total emitted luminous flux, in lumens, to the
total electric power consumption in watts.
- Luminous flux: The rate of flow of light per unit of time, especially the flux of
visible light, expressed in lumens.
- Luminous intensity: The luminous flux density per solid angle as measured in a given
direction relative to the emitting source. The customary unit is candlepower, the
SI unit is the candela.
- Life Hours: an average rating in hours when approximately 50% of the bulbs in the
test fail. The testing assumes normal operating conditions.
- Color Temperature: The measurement of color expressed in Kelvin (K). The lower the
Kelvin rating, the “warmer” or more yellow the light. The higher the rating, the
“cooler” or more blue the light. For residential use, we recommend our day white
and natural white colors.
- Glare: The sensation produced by brightness within the visual field that is sufficiently
greater than the luminance to which the eyes are adapted. Glare can cause blurred
vision, discomfort, headaches or loss in visual performance and visibility.
- Voltage: a measurement of electrical potential and is the force that pushes electrical
current through a conductor.
- Wattage: the rate at which energy is taken from an electrical source or dispersed
by a load. LED Bulbs are rated in Watts to indicate energy consumption.
- Illuminance: The density of luminous power, also called “illumination.” One lumen
of luminous flux uniformly incident on 1 square foot of area produces an illuminance
of 1 footcandle. In SI units, one lumen of luminous flux uniformly incident on 1
square meter of area produces an illuminance of 1 lux.
- Ingress protection rating: The IP code or IP rating defined in the international
standard IEC 60529 that classifies the level of protection that electrical appliances
provide against the intrusion of solid objects or dust, accidental contact, and
water.
|
|
|
|
|